9 ADAPTIVE VEST SYSTEM™ (AVS)
1 Remove front and rear platebags from AVS™ harness. Remove plastic
buckle from shoulder strap on front platebag.
3 Install shoulder strap covers.
2 Align front and rear platebag straps and connect straps. The strap
attachments can also be adjusted to determine nal ride height.
4 Repeat for other side. Ensure that cable routing loops face outwards.
PLATE CARRIER CONFIGURATION (8 STEPS)
The AVS™ can be recongured to become a plate carrier consisting of front and rear platebags and the single side strap or 2-band cummerbund.
To Next Page
Loading...