6
JUMPABLE PLATE CARRIER
TM
(JPC)
1. Lay rear carrier flat as shown. Locate strap buckles near side edges of
carrier. Ensure that loop panels of strap are facing up. Insert non hook-
and-loop end of single strap up and through buckle as illustrated.
2. After installing ballistic protection (see next page), don JPC by placing
over the head onto the shoulders. Open the front panel flap of the carrier
and attach hook panels of strap to loop panel of carrier and close the flap.
3. To adjust the tightness of the single straps, grab the extra slack in the
strap and pull forward to achieve desired setting. Use the rear buckles to
release strap tension.
INSTALLING + ADJUSTING SINGLE STRAPS
To Next Page
Loading...