8
JUMPABLE PLATE CARRIER
TM
(JPC)
1. Remove any headgear. Place vest over head as shown, centering both
front and back panels on the body.
3. Close front panel flap to secure cummerbund (or single straps)
into place and ensure that vest feels secure and fits comfortably. If
adjustments are required, see next page.
Doffing: Reverse order of steps listed above.
2. Open front panel flap of carrier and attach hook panels of
cummerbund (or single straps) to loop panels of front carrier.
4. If using Skeletal™ cummerbund, the elastic cord(s) should stretch
under some tension to ensure that the cummerbund will not shift during
movement.
DONNING + DOFFING
To Next Page
Loading...