CryptOn 700 Series - DSM Fault Diagnosis

Emissions Tester CCP700/800 Series Hints & Tips
28
BLUETOOTH SYNC
Smoke Head
https://www.cryptontechnology.com/images/support/pdf/how-to-guides/bluetooth-smoke-
meter-setup.pdf
Temp Device
https://www.cryptontechnology.com/images/support/pdf/how-to-guides/bluetooth-
communication-setup-guide-oil-temp.pdf
Tach Device
https://www.cryptontechnology.com/images/support/pdf/how-to-guides/bluetooth-
communication-setup-guide-battery-tach.pdf
Emissions Tester CCP700/800 Series Hints & Tips
29
PRINTER ISSUES
Printer Sleep Timer Delay
https://www.cryptontechnology.com/images/support/pdf/how-to-guides/printer-sleep-mode.pdf
Printer Guide Inc. LED Indicators
https://www.cryptontechnology.com/images/support/pdf/how-to-
guides/Printer_Includes_LED_Indicators_Crypton.pdf
Brother Printer Toner
If subsequent to a replacement toner cartridge being fitted it appears not to have worked try the
following reset process.
• Open the front cover and leave open while completing the following steps.
• Turn the printer off.
• Hold the ‘go’ button while turning the printer on. All panel lights should be on.
• Release the ‘go’ button.
• Press the ‘go’ button 2 times.
• Pause.
• Press the ‘go’ button 5 times.
• The toner light should be o.
• The paper light should be on or ashing.
• Close cover.
• The ready light should be the only light on