Why is the flame yellow on my crystal fires CF3 MONTANA?
- MMiranda WallaceJul 30, 2025
A yellow flame on your Crystal Fires Indoor Fireplace may indicate that the aeration hole needs cleaning. Check the pilot to resolve this issue.
Why is the flame yellow on my crystal fires CF3 MONTANA?
A yellow flame on your Crystal Fires Indoor Fireplace may indicate that the aeration hole needs cleaning. Check the pilot to resolve this issue.
Brand | crystal fires |
---|---|
Model | CF3 MONTANA |
Category | Indoor Fireplace |
Language | English |
Legal and regulatory requirements for installing gas appliances by competent persons and relevant standards.
Essential checks for flue condition, obstructions, updraft, and smoke leakage before appliance installation.
Important warnings and guidelines regarding the operation and maintenance of the appliance's atmosphere sensing device.
Procedures for refitting the fire tray, performing gas soundness tests, and checking inlet gas pressure.
Annual servicing requirements by a gas safe registered engineer, including checks and procedures for parts replacement.
Identifies correct (strong blue) and incorrect (yellow flame) pilot flames and their potential causes.
Crucial safety warnings concerning fireguards, servicing, firebed maintenance, combustible materials, and relighting procedures.
Guidance on common issues like dust, pilot flame problems, and remote control battery maintenance.