CRYSTAL MARK SWAM-BLASTER LV-1 User Manual

SWAM BLAST IS A REGISTERED TRADEMARK OF CRYSTAL MARK, INC.
SWAM-BLASTER IS A TRADEMARK OF CRYSTAL MARK, INC.
Micro Abrasive Sandblaster
MODEL LV-1
OPERATING AND MAINTENANCE MANUAL
MANUAL NO. 6029
REV. 6.0 01/07
MANUFACTURED BY:
CRYSTAL MARK, INC.
A SWAN Technologies Corporation
613 Justin Avenue, Glendale, CA 91201 USA
(818) 240-7520 • (800) 659-7926 • FAX (818) 247-3574
www.crystalmarkinc.com – sales@crystalmarkinc.com

CRYSTAL MARK SWAM-BLASTER LV-1 Specifications

General

Brand	CRYSTAL MARK
Model	SWAM-BLASTER LV-1
Category	Power Tool
Language	English

Summary

Installation Procedures

Unit Unpacking and Inspection

Air and Electrical Supply Requirements

Details the necessary air and electrical specifications for operation.

Installation and System Checkout Procedure

Step-by-step guide for installing and verifying the unit's functionality.

Filling the Auxiliary Powder Chamber

Operation of the SWAM-BLASTER

Operating Controls and Indicators

Explains the function of each control, indicator, and connector on the unit.

SWAM-BLASTER Operating Procedures

Detailed steps for performing various operations with the SWAM-BLASTER.

Service Instructions and Maintenance

Key Component Functions and Operation

Describes the function and operation of major internal components.

Periodic Inspection and Cleaning

Component Maintenance and Replacement

Troubleshooting Common Problems

Guide to diagnose and resolve operational malfunctions of the unit.

Accessories and Parts

Nozzle Selection Chart