Crystal DBH034PK - INSTALLING THE BATTERY & BELT CLIP; Belt Clip Installation; Battery Installation Guide

INSTALLING THE BATTERY & BELT CLIP
Belt clip
The supplied belt clip simply slides into the back of the main radio and clicks in place to
lock. If fitted, remove the belt clip by lifting the top tab away from the main unit and slide
the belt clip up. Slide the battery cover down approximately 5mm, then lift away the cover.
Slide down the battery compartment cover. Insert 3 x AAA batteries (not supplied).
Position the batteries according to the polarity marking on the battery compartment.
After placing batteries into correct positions, replace the battery cover.!!
!
!
!
!
!
!
!
!
!
!
!
!
!
!
!