GL2072CY Wall Bracket Illustrated
Pebbles Ember Installation
Glass front must be removed and the appliance must be mounted in its final location before the
pebble embers are installed.
A. CLEAN CRYSTALS MEDIA: crystals media may have a fine oil
residue that needs to be cleaned prior to installation. Clean the
pebbles with mild dish soap, drain, rinse thoroughly and dry before placing into the tray.
B. Place the plastic tray ( G ) to the fireplace designed place.then carefully place crystals
embers into the bottom tray on the front of the appliance as illustrated. Apply an even layer
from side to side. Figure 2, Figure 3.
Figure 2. Figure 3.
ALWAYS keep the decorative crystals OUT OF REACH OF CHILDREN! Leave no
pebbles where children can find them. Failure to do so could cause a choking hazard.
To Next Page
Loading...
Need help?
General