Need help?Do you have a question about the CSF Inox CS 25-175 and is the answer not in the manual?
Critical safety information and precautions to prevent injury or damage.
Lists applications and conditions where the pump must not be used.
Specifies environmental conditions and protection levels for pump operation.
Step-by-step guide for correctly mounting the pump on a foundation plinth.
Procedures for achieving precise axial and angular alignment of pump coupling parts.
Details on coupling disassembly and permitted alignment tolerances.
Instructions for assembling CSK couplings, including hub and radial alignment.
Detailed steps for fitting the elastic insert and retention ring into the coupling.
Instructions for assembling couplings with a spacer body.
Steps for making electrical connections, safety, and wiring diagrams.
Lists common operational problems encountered with the pumps.
Continues listing potential causes and necessary operations to resolve pump issues.
A matrix correlating possible causes with encountered problems for quick diagnosis.
Provides a detailed guide to identify causes and solve operating malfunctions.
Step-by-step guide for disassembling the "T/W" execution pump.
Continues the disassembly process for the "T/W" execution pump.
Steps for disassembling the bearing assembly from the "T/W" pump.
Procedures for disassembling the "Q" execution pump with double mechanical seals.
Continues the disassembly process for the "V" execution pump.
Steps for disassembling the "V" execution pump.
Steps for assembling the "T/W" execution pump in reverse of disassembly.
Procedures for assembling the "Q" execution pump.
Step-by-step guide for disassembling the CSK pump bearing support.
Instructions for assembling CSK pump bearings, including Speedi-Sleeve rings.
General| Type | Centrifugal Pump |
|---|---|
| Material | Stainless Steel |
| Max Flow Rate | 25 m³/h |
| Max Head | 175 m |
| Voltage | 230/400 V |
| Frequency | 50 Hz |
| Phase | 3 |
To Next Page
