8 English
4. Driver installaon
The driver installaon is usually fully automac. If the automac installaon of
the device is not successful, please carry out the setup manually as described
below.
Insert the driver CD into your drive and close the drive again. Call up the contents
of the CD in My Computer or Explorer and start the installaon by double-clicking
on “setup.exe”.
A security prompt appears, which you must conrm with “Yes”.
Insert the PCI card into the designa-
ted slot. Make sure that the card is
rmly seated in the slot. Then fasten
the card to the PC housing with a
screw.