CSL 301674 - Page 11

11English

HOME buon:
PC: Switch between analogue and digital mode for buons and control pad. The
LED display glows red in analogue mode.
PS3: It is used for the connecon of wireless gamepads and has the funcon of the
PS buon – if connected to a PS3.
Turbo buon:
Press the Turbo buon and any other buon to provide those with a pulse. You can
provide as many buons as you wish with the “Turbo” mode. Repeat the process
to remove this eect from the chosen buon.
At an acvated Turbo mode no long but a lot of signals in quick succession are
being created.
Clear buon:
The “Clear” buon causes the removal of the Turbo eect from all buons at once.

Please fully charge the gamepad before the rst usage. Therefore connect the in-
cluded charging cable to the gamepad.
A suitable power source can be for example a Playstaon 3, a computer or an USB
charging adapter. As soon as the gamepad is charging it is shown on the LED dis-
play.
Note: The included connecon cable is exclusively suitable for charging. It does not
replace the funcon of the USB receiver.

The gamepad has two strong vibraon motors. Due to the eect of vibraon, is the
control represented very realiscally.