17English
If the printer is not found, click on "The Printer that I want is not listed". Select
"Add printer using a TCP / IP address or hostname" and click on the "Next" buon.
You must then enter the IP address of the print server in both the available elds.
You can nd the IP address, for instance, from the menu of your router. Aer en-
tering the IP address, click "Next".
Aer a few seconds, a new "Addional port informaon required" window opens.
Here, click on "User dened" and open "Sengs".
In this menu item, select the protocol "LPR" and enter a "Queue name".
Then click "OK" and "Next". The "Install the printer driver" window opens. Look
for your printer in the list and install the driver manually by clicking on "Disk" and
specifying the path where the driver is located.
The manual setup of your print server is now complete.
To Next Page
Loading...