CSL DigiAir Pro 3 Guide

DigiAir Pro 3 - LEDs Colour Status Guide
Guide
As the DigiAir Pro 3 powers up for the very first time it will run through its
commissioning process. You will need to wait for LEDs 1, 2 & 3 to go green before
the unit reboots.
LED 1 LED 2 LED 3
No light = No
power
Red flashing = No
comms
Red flashing = No comms
Amber flashing =
Power start-up
Amber flashing =
Single path comms
(dual path systems)
Amber flashing = Comms path
found
Green flashing =
Power on
Amber solid = Commissioning
server found. Contacting alarm
server
Green Solid = Fully Commissioned
Once commissioned, the unit will return to its quiescent/normal state. LED 3 should
be visible and LEDs 1 & 2 will be off. LED 3 will show you whether the unit has any
errors or is transmitting data.
LED 3
Red: Internal error (not commissioned or configuration error) – please
contact Tech Support
Flashing Amber: Communication error – please press Button A for more
details
Green: Device is operating normally
Flashing Green: Device is operating normally and transmitting or receiving
data
From the quiescent/normal state, press button A. Only LED 1 will show.
LED 1

CSL DigiAir Pro 3 Specifications

General

Brand	CSL
Model	DigiAir Pro 3
Category	Industrial Equipment
Language	English