Need help?Do you have a question about the CSL DigiAir Pro 3 and is the answer not in the manual?
Details the DigiAir Pro 3 range, its resilience, and access to CSL Live.
How to check radio signal strength and find the optimal aerial location.
Steps to connect the DigiAir Pro 3 LAN to a network and firewall configuration.
Securely fitting the unit and wiring in the correct order.
Guidelines for mounting the aerial for best signal reception.
Describes the automatic commissioning process and LED indications.
Explains the LED status in the quiescent/normal state after commissioning.
Steps to verify the device is functioning correctly by sending signals.
How to use buttons to view status and perform functions.
Checking radio signal strength via LED 1.
Checking LAN connection status via LED 1.
Procedures to generate a test call and perform a pin learn.
How the device is triggered by applying or removing zero volts to input terminals.
How the DigiAir Pro 3 simulates phone line connections for alarm transmission.
Connecting the DigiAir Pro 3 LAN via DC09 to a panel over a LAN.
Connecting to various panels using serial cables (RS232, RS485, TTL).
Overview of features for managing and configuring DigiAir Pro 3 devices.
A guide to understanding the meaning of different LED states.
Solutions for common issues related to radio path connectivity.
Solutions for common issues related to LAN path connectivity.
Detailed technical data including dimensions, power, and standards.
General| Operating Temperature | -20°C to +70°C |
|---|---|
| Communication Technology | Wireless |
| Inputs | Digital, Analog |
| Outputs | Digital |
| Operating Frequency | 868 MHz, 915 MHz |
| Power Supply | 12-24V DC |
To Next Page
