Page 11-C
6.6.2.6. Step 5 – Soak at -40°C for 1 Hr. Repeat cycle for a total of 5 cycles
6.6.2.7. Step 6 – Ramp to 25°C
6.6.2.8. Step 7 – Soak at 24°C for 30 min
the cycle until cycle count
is reached
minus the desired cycle
count: 5-1=4
It is recommended to return
chamber to ambient temp
(24°C) after testing for at least
30 min to reduce any risk
when opening chamber door
To Next Page
Loading...