CT Scuderia - Chronograph Hand Zero Adjustment; Zeroing Procedure

15
A
B
C
D
E
F
G
H
I
Hour hand
Minute hand
Second hand
Crown
Hour counter
Center
stop-second
Minute counter
Pusher 1
(reset)
Pusher 2
(start/stop)
Adjusting the chronograph hands to zero position
1. Pull out the crown to position III (all three chronograph hands are in their correct or incorrect
zero position).
2. Keep pusher 2 and 1 depressed simultaneously for at least 2 seconds (the center stop-second
rotates by 360º - corrective mode is activated).
3. Press pusher 2 to single step the center stop-second hand. Press and hold pusher 2 to advance
the center stop-second hand quickly. Press pusher 1 to advance the next hand.
4. Press pusher 2 to single step the hour counter hand. Press and hold pusher 2 to advance the
hour counter hand quickly. Press pusher 1 to advance to the next hand.
5. Press pusher 2 to single step the minute counter hand. Press and hold pusher 2 to advance the
minute counter hand quickly.
6. Return the crown to position I.