CTA PAD-UATPB2 User Manual

Package Contents
1
2
Insert the case connector into
the short tube the tighten the screws
using included Allen key
Fixed clamp
Holder
Holder connector
Lock
Key
Tube connector
Key slot
Insert the tube connector
into the long tube then
tighten the screws
using included Allen key
Sliding clamp
Stylus
Short tube
Holder connector
Long tube
Base connector
Base
3
Insert the long tube into
the base connector then
tighten the screws
using included Allen key
Security Kiosk Dual Stand for 7-14 Inch Tablets
PAD-UATPB2
support@ctadigital.com

CTA PAD-UATPB2 Specifications

General

Brand	CTA
Model	PAD-UATPB2
Category	Racks & Stands
Language	English

Summary

Package Contents

Initial Assembly Steps

Connect case connector, long tube, and tube connector using provided screws and Allen key.

Using the Holder

Secure Tablet in Holder

Place tablet, engage sliding clamp, and lock with the key for secure mounting.

Cable Management System

Route cables through the stand using protective sleeves for a tidy installation.