CTI 2500 Series User Manual

2500 Series® Compact System
Control Technology Inc.
5734 Middlebrook Pike, Knoxville, TN 37921-5914
Phone: +1.865.584.0440 Fax: +1.865.584.5720
www.controltechnology.com
2500C-PS-120V-35 120VAC 35 Watt Power Supply
Copyright© 2022 Control Technology Inc All Rights Reserved 21 February 2022
CAUTION – Non-Hazardous Areas/Hazardous Areas
Turn off power to the system before replacing fuses either in power supplies or IO modules. Refer to Product
Bulletin or Installation and Operation Guide for specific information on the correct fuse for replacement. If
there are any questions please contact CTI support. Fuses should only be replaced by qualified technicians.
WARNING – EXPLOSION HAZARD. DO NOT
REMOVE OR REPLACE WHILE CIRCUIT IS LIVE
UNLESS THE AREA IS FREE OF IGNITIBLE
CONCENTRATIONS.
AVERTISSEMENT – RISQUE D’EXPLOSION. NE
PAS RETIRER NI REMPLACER PENDANT QUE LE
CIRCUIT EST SOUS TENSION À MOINS QUE
L’EMPLACEMENT NE SOIT EXEMPT DE
CONCENTRATIONS INFLAMMABLES.
WARNING – EXPLOSION HAZARD. DO NOT
REMOVE OR REPLACE FUSE WHEN ENER-
GIZED.
AVERTISSEMENT – RISQUE D’EXPLOSION. NE
PAS RETIRER NI REMPLACER UN FUSIBLE SI
L’APPAREILLAGE EST SOUS TENSION.

CTI 2500 Series Specifications

General

Brand	CTI
Model	2500 Series
Category	Controller
Language	English