Quick Installation
1. Connect Video cable
Make sure both monitor and computer are powered OFF. Connect the video cable
(VGA cable) to the computer, then to the monitor.
or connect DisplayPort cable
Connect the DisplayPort cable from DisplayPort output of computer to the DisplayPort
input of the monitor.
or connect HDMI cable *Optional
Connect the HDMI cable from HDMI output of computer to the HDMI input of the
monitor.
2. Connect Power cord
Connect the power cord to the monitor power input connector first, and then connect
the power cord to a properly grounded AC outlet. Suggest that you use a power strip
with a surge suppressor.
3. Connect Audio cable
Connect the Audio cable from Audio output of computer to the Audio input of the
monitor.
4. Power-ON computer and monitor
Power-ON the computer, then Power-ON the monitor.
5. Windows users: Setting the Timing Mode (Resolution and Refresh Rate)
Example: 1920 x 1080 @ 60 Hz
Resolution Right-click on the Windows desktop > Properties > Settings > “Desktop
Area”. Set the resolution.
Refresh Rate (vertical frequency) See your graphic card’s user guide for instructions.
Example:
PC
VGA cable
HDMI cable
Power cable
DisplayPart cable
To Next Page
Loading...
General