Need help?Do you have a question about the Cub Cadet 147 and is the answer not in the manual?
General| Engine Type | Single-cylinder, air-cooled |
|---|---|
| Horsepower | 14 hp |
| Transmission Type | Hydrostatic |
| Weight | 650 lbs |
| Production Years | 1969-1971 |
| Fuel Capacity | 3 gallons |
| Number of speeds | Infinite |
| Brakes | Internal expanding |
| Tires | Rear: 8.50-12 |
Details on starting, stopping, and the functions of the throttle and governor.
Step-by-step guide for starting the tractor's engine.
Description of the combined clutch and brake pedal operation.
Steps to start the tractor in motion after engine start.
Details on brake pedal operation and its effect on the speed control lever.
Methods for stopping the tractor safely.
How to operate the electric lift to raise or lower mounted equipment.
Procedure for adjusting clutch clearance and pedal free movement.
Steps to adjust the brake engagement point and pedal stop.
Clutch adjustment for clearance and free movement.
Procedure for adjusting brake engagement and ensuring equalization.
Adjusting mechanical disc brakes for proper engagement and equalization.
Common problems and their possible remedies for starting and engine operation.
Troubleshooting causes and solutions for reduced tractor power.
Identifying and resolving engine overheating issues.
Recommendations for engine oil type, capacity, and change intervals.
Details on oil level gauges for different tractor models.
Detailed lubrication intervals and procedures for the Cub Cadet 73.
Detailed lubrication intervals and procedures for Cub Cadet 106/126.
Detailed lubrication intervals and procedures for Cub Cadet 107/127/147.
Basic operating steps for the rotary mower, including setup and engine speed.
Steps to ensure the mower is level for optimal cutting performance.
Setting the lift handle stop for desired cutting height.
Instructions for sharpening, balancing, and replacing mower blades.
Crucial safety precautions for operating the rotary mower.
To Next Page
