Need help?Do you have a question about the Cub Cadet 1772 and is the answer not in the manual?
General| Transmission | Hydrostatic |
|---|---|
| Drive | 2WD |
| Number of speeds | Infinite |
| Deck Material | Steel |
| Blades | 3 |
| Lift | Manual |
| Tires (Front) | 16x6.5-8 |
| Engine | Kohler |
| Turning Radius | 18 inches |
Crucial warnings regarding engine exhaust, spark arresters, and general safe operation.
Detailed safety rules for operating riding vehicles, covering general conduct and hazards.
Key safety precautions to be followed during operation and maintenance.
Specifies recommended oils, capacities, and change intervals for engine lubrication.
Identifies and labels all instruments and controls on the tractor's dashboard.
Describes safety features preventing accidental engine starting or PTO engagement.
Details the four-position ignition switch and starting procedure.
Details oil capacity, change intervals, and level checking procedures.
Warnings and notes about the safety interlock system during engine starting.
Step-by-step guide for starting the tractor engine.
Steps for safely shutting down the tractor engine.
Key cautions and notes for operating the tractor, including power steering and PTO.
Guidelines and warnings for operating the tractor on inclines.
Procedures for safely stopping the tractor and engaging safety features.
Step-by-step guide for adjusting the tractor's brakes.
Procedures and cautions for checking fuel level and refueling the tractor.
Explains when and how to bleed the fuel system.
Steps to bleed air from the fuel filter.
Procedures for bleeding air from the injection pump.
How to check the engine oil level and add oil if necessary.
Step-by-step guide for draining and refilling engine oil.
Instructions for removing and installing a new engine oil filter.
Important warnings and procedures for checking and adding radiator coolant.
Steps for checking electrolyte level, specific gravity, and terminals.
Crucial safety warnings related to discharge direction and bystanders.
A detailed schedule of operations to be performed at various intervals.
Lists potential causes and remedies for engine starting problems.
Identifies causes and solutions for low engine power and overheating.
Lists critical conditions that necessitate immediate engine shutdown.
Critical warnings about operating on slopes and safe practices for riding mowers.
To Next Page
