Cub Cadet 19C70020 Series - User Manual

Safe Operation Practices • Contents of Carton • Assembly & Installation • Operation • Warranty
OperatOr’s Manual
Twin Rear Bagger
Model Nos. 19C70020* & 19A70043*
Record Product Information
Before setting up and operating your new equipment, please locate the model plate
and record the information in the area provided to the right. You can locate the
model plate by looking on the outside of the bagger cover. The model plate contains
the unit’s model and serial numbers. This information will be necessary should you
seek technical support via our web site, Customer Support Department, or with a
local authorized service dealer.
Model NuMber
Serial NuMber
Form No. 769-23370
(October 16, 2019)
WARNING
Read and follow all safety rules and instructions in this manual before attempting to operate this machine. Failure to comply with these instructions
may result in personal injury.
Safe Operation Practices .......................................................... 2
Contents of Carton ................................................................... 4
Assembly & Installation ........................................................... 6
Operation ............................................................................. 10
Warranty ...............................................................................12
Español ..................................................................................13
Français ................................................................................ 25
Table of Contents
NOTE: This Operator’s Manual covers several models. Features may vary by model. Not all features in this manual are applicable to all models and the model depicted may differ
from yours.
WARNING
California Proposition 65
Engine Exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to the State of California to cause cancer and birth
defects.

Cub Cadet 19C70020 Series Specifications