
Do you have a question about the Cub Cadet 2160 and is the answer not in the manual?
| Cutting Width | 46 inches |
|---|---|
| Transmission | Hydrostatic |
| Deck Material | Stamped steel |
| Drive | 2WD |
| Weight | 550 lbs |
| Transmission Type | Hydrostatic |
| Engine Type | Kohler Command |
| Engine HP | 16 hp |
| Cutting Height Range | 1-4 inches |
Indicator for low engine oil level.
Controls engine ignition and lights.
Prevents tractor from rolling downhill.
Location of tractor and engine serial number plates.
Controls forward movement and speed.
Prevents unsafe operation.
Procedures for safely starting the tractor engine.
Operating instructions for the Model 2160 tractor.
Safety guidelines for operating on inclines.
Procedures for safely stopping the tractor.
Steps for checking and adjusting the tractor's brakes.
How to adjust the toe-in of the front wheels.
Adjusting transmission linkage for neutral setting.
Procedures for adjusting the engine carburetor.
Information on engine oil type, viscosity, and checking.
Procedures for changing engine oil and filter.
How to check the transmission oil level.
Checking and cleaning the air cleaner components.
Safety precautions and information about the battery.
Steps for safely removing and installing the battery.
Procedure for jump-starting the tractor's battery.
Techniques and tips for effective and clean mowing.
Schedule of maintenance tasks and intervals.
Table detailing lubrication points, frequency, and types.
General guidelines and importance of proper lubrication.
Guide for determining safe operating slopes.
Owner's duties regarding maintenance and warranty claims.
Specific provisions for emission control defects warranty.











