Cub Cadet 5000 Series User Manual

CUB CADET LLC P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 [www.cubcadet.com]
IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
Warning
: This unit is equipped with an internal combustion engine and should not be used on or near any unimproved
forest-covered, brush-covered or grass-covered land unless the engine’s exhaust system is equipped with a spark
arrester meeting applicable local or state laws (if any). If a spark arrester is used, it should be maintained in effective
working order by the operator. In the State of California the above is required by law (Section 4442 of the California Public
Resources Code). Other states may have similar laws. Federal laws apply on federal lands. A spark arrester for the
muffler is available through your nearest engine authorized service dealer or contact the service department, P.O. Box
361131 Cleveland, Ohio 44136-0019.
Operator’s Manual
PRINTED IN U.S.A. FORM NO. 769-00868
(10/03)
TRACTOR
MODEL 5254
SERIES 5000

Cub Cadet 5000 Series Specifications

General

Transmission	Hydrostatic
Cylinders	2
Cutting Width	50 inches
Deck Material	Fabricated Steel
Warranty	3 years

Summary

TO THE OWNER

CALLING SERVICE INFORMATION

How to contact Cub Cadet for service and support.

RECORDING MODEL AND SERIAL NUMBER INFORMATION

IMPORTANT SAFE OPERATION PRACTICES

GENERAL OPERATION

General rules and precautions for operating the tractor safely.

SLOPE OPERATION

OPERATING THE PTO

SAFETY FRAME (ROPS)

SERVICE

SAFETY LABELS

SECTION 1: CONTROLS AND FEATURES

STEERING WHEEL

Controls the direction of the tractor.

IGNITION SWITCH

Controls engine starting and electrical system power.

FORWARD CONTROL PEDAL

Controls forward movement speed by depression.

TRANSMISSION HI/LO RANGE SHIFT LEVER

Selects the high or low speed range for the transmission.

INSTRUMENT PANEL

ENGINE OIL PRESSURE LIGHT

Indicates low engine oil pressure, requiring immediate attention.

ENGINE COOLANT TEMPERATURE LIGHT

Warns of engine overheating, requiring immediate cooling.

HOUR METER

Records operating hours for tracking maintenance schedules.

SECTION 2: OPERATION

ROLLOVER PROTECTIVE STRUCTURE (ROPS)

Structure designed to protect the operator during a tractor rollover.

SAFETY INTERLOCK SYSTEM

Prevents operation unless safety conditions are met.

FUELING THE TRACTOR

NEW TRACTOR BREAK-IN PROCEDURES

STARTING THE ENGINE

STOPPING THE ENGINE

DRIVING THE TRACTOR

STOPPING THE TRACTOR

Steps to safely bring the tractor to a complete stop.

USING THE FORWARD AND REVERSE PEDALS

USING THE HI/LO RANGE SHIFT LEVER

DRIVING ON SLOPES

USING THE DIFFERENTIAL LOCK PEDAL

USING THE 4WD SHIFT LEVER

USING THE HYDRAULIC LIFT LEVER

ENGAGING THE PTO

USING THE PTO REVERSE OVERRIDE SWITCH

LIGHTING

USING THE THREE POINT HITCH

REMOVING THE REAR PTO COVER

TRACTOR WEIGHTING

FRONT WEIGHTS

Adding weight to the front for balance and stability.

WEIGHTING THE REAR OF THE TRACTOR

Adding weight to the rear for balance and stability.

SECTION 3: ADJUSTMENTS

ADJUSTING THE SEAT

Adjusting the seat position for operator comfort and control.

ADJUSTING THE SEAT BELT

Adjusting the seat belt for proper fit and safety during operation.

THREE POINT HITCH ADJUSTMENTS

ADJUSTING FRONT WHEEL TOE-IN

ADJUSTING THE BRAKES

SECTION 4: MAINTENANCE

LUBRICATION TABLE

Chart detailing lubricants, capacities, and maintenance intervals.

LUBRICATION AND MAINTENANCE CHART

ACCESSING THE ENGINE COMPARTMENT

GENERAL BATTERY INFORMATION

BATTERY REMOVAL

CHARGING THE BATTERY

BATTERY MAINTENANCE

BATTERY STORAGE

HEAD LIGHT BULB REPLACEMENT

SERVICING ELECTRICAL SYSTEM

ACCESSING THE FUSE CENTER

INSTRUMENT PANEL FUSES

MAIN FUSE

CHECKING TRANSMISSION/HYDRAULIC SYSTEM OIL LEVEL

25 HOUR BREAK-IN PERIOD FILTER CHANGE

CHANGING HYDRO TRANSMISSION OIL FILTER

CHANGING HYDRAULIC SYSTEM FILTER

CHANGING THE HYDRO TRANSMISSION AND HYDRAULIC SYSTEM OIL

CHECKING OIL LEVEL IN FRONT AXLE AND FINAL REDUCTION GEAR CASES

CHANGING FRONT AXLE AND FINAL REDUCTION GEAR CASE OIL

LUBRICATION OF DRIVE SHAFT

WHEEL LUG NUT TORQUE

TIRE MAINTENANCE

MAINTENANCE OF THE ROLLOVER PROTECTIVE STRUCTURE (ROPS)

TRACTOR STORAGE

REMOVING THE TRACTOR FROM STORAGE

SECTION 5: ENGINE INFORMATION AND MAINTENANCE

KAWASAKI LIMITED WARRANTY

Details of the emission control systems warranty provided by Kawasaki.

OWNERS WARRANTY RESPONSIBILITIES

Owner's obligations to maintain warranty validity and care for the engine.

3. LIMITED LIABILITY

ENGINE MAINTENANCE

CHECKING ENGINE OIL LEVEL

ADDING ENGINE OIL

CHANGING THE ENGINE OIL AND FILTER

CHECKING ENGINE COOLANT LEVEL

CHANGING THE ENGINE COOLANT

CHANGING THE AIR CLEANER

SERVICING THE SPARK PLUGS

CHANGING THE FUEL FILTER

SECTION 6: SPECIFICATIONS

ENGINE

Technical specifications for the tractor's engine.

TRANSMISSION

Technical specifications for the tractor's transmission system.

SPECIFICATIONS

HYDRAULIC LIFT SYSTEM

Technical specifications for the hydraulic lift system.

TIRES

Specifications related to tire size and inflation pressure.

GENERAL DIMENSIONS

Overall physical dimensions of the tractor.

SECTION 7: OPTIONAL EQUIPMENT AND ACCESSORIES

LIMITED WARRANTY

HOW TO OBTAIN SERVICE

Instructions on contacting an authorized dealer for service.