Cub Cadet 782

To
The Owner
recommended operation and maintenance pro.
cedures are followed.
To obtain top performance and assure economical
operation the tractor should be inspected,
depending on its use, periodically, or at least once
a year, by your authorized dealer.
When in need of parts, always specify the model,
chassis, and engine serial numbers, including the
prefix and suffix letters. Write these serial
numbers in the space provided on this page.
Should you have difficulties with the unit consult
your authorized dealer. UNDER NO CIRCUM.
STANCES SHOULD YOU AnEMPT TO SERVICE
THESE UNITS YOURSELF. Only your dealer is
authorized to repair or replace units on this drive
under the terms of the warranty. Should you
desire additional information not found in this
manual, contact your authorized Cub Cadetdealer.
Assembled in this manual are operation, lubrica-tion,
and maintenance instructions for the Cub
Cadet 1282, 682 and 782 Tractors. The material has
been prepared in detail to help you better under-
stand the correct care and efficient operation of
your tractor. Before you operate the tractor, study
this manual carefully. Additional copies may be
ordered from your dealer at a nominal price.
Your local authorized dealer is interested in the
performance you receive from your tractor. He has
factory-trained servicemen, informed in the latest
method of servicing tractors, modern tools, and
original-equipment service parts which assure
proper fit and good performance.The
Cub Cadet 1282,682 and 782 Tractors have a
hydrostatic drive. It is the best hydrostatic drive
unit available and will require minimum service if
SERIAL
NUMBER LOCATION
.
Chassis Serial Number
FIGURE 1,
FIGURE 2.
Serial number plate is located near left rearfender.
See figure 1.
NOTE: LEFT and RIGHT indicate the left and right
sides of the tractor when facing forward in the
driver's seat. Reference to FRONT indicates the
grille end of the tractor; to REAR the drawbar end.
MODEL
DELIVERY
DA TE -
5