Cub Cadet BIG COUNTRY 4X2

Service Manual
IMPORTANT: READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
PRINTED IN USA
FORM NO.769-00965
This Service Manual is not a substitute for the Operator’s Manual. You must read, understand
and follow all of the directions in this manual as well as the Operator’s Manual before working
on this power equipment.
(11/2003)
CUB CADET LLC, P.O. BOX 361131, CLEVELAND, OH 44136-0019
Cub Cadet Big Country 4x2
NOTE: These materials are for use by trained technicians who are experienced in the service and repair of outdoor power 
equipment of the kind described in this publication, and are not intended for use by untrained or inexperienced individuals. 
These materials are intended to provide supplemental information to assist the trained technician. Untrained or inexperienced 
individuals should seek the assistance of an experienced and trained professional. Read, understand, and follow all instructions 
and common sense when working on power equipment. This includes the contents of the product’s Operators Manual, supplied 
with the equipment. No liability can be accepted for any inaccuracies or omission in this publication, although care has been 
taken to make it as complete and accurate as possible at the time of publication. However, due to the variety of outdoor power 
equipment and continuing product changes that occur over time, updates will be made to these instructions from time to time. 
Therefore, it may be necessary to obtain the latest materials before servicing or repairing a product. The company reserves the 
right to make changes at any time to this publication without prior notice and without incurring an obligation to make such 
changes to previously published versions. Instructions, photographs and illustrations used in this publication are for reference 
use only and may not depict actual model and component parts. © Copyright 2005 MTD Products Inc. All Rights Reserved
MTD Products LLC - Product Training and Education Department

Cub Cadet BIG COUNTRY 4X2 Specifications

General

Brand	Cub Cadet
Model	BIG COUNTRY 4X2
Category	Utility Vehicle
Language	English

Summary

Cub Cadet 4 x2 Brake System Service

Visual Inspection and Operational Test

Inspect brake components and perform functional tests to ensure proper operation and safety.

Complete Brake Inspection

Detailed steps for comprehensive brake inspection, including drum and shoe removal.

Brake Adjustment Procedures

Steps for adjusting brake shoes, linkage, and related components for correct operation.

Dana Transaxle Maintenance

Cradle and Link Assembly Inspection

Details on inspecting and maintaining the engine cradle and the "dogbone" link assembly.

Transaxle Lubrication and Cleaning

Procedures for transaxle oil changes, level checks, cleaning, and lubrication type.

Transaxle Removal

Steps for properly removing the transaxle from the vehicle for service or replacement.

4 x2 Gear Selector System

System Description and Operation

Overview of the electronically controlled and vacuum actuated gear selection mechanism.

Self-Diagnostics and Fault Codes

How to interpret instrument panel light codes for system malfunctions and troubleshooting.

System Diagnosis Methodology

Guide to diagnosing gear selector issues, covering basic checks, vacuum, and electrical tests.

Vacuum System Testing

Procedures for testing vacuum lines, solenoids, and actuators for proper gear shifting function.

Differential Lock Actuator and Control

Testing and operation of the differential lock actuator and its vacuum control.

Electrical System Diagnosis

Troubleshooting the electrical components of the gear selector system, including switches and solenoids.