7
5. Check the blade(s) and engine mounting bolts at
frequent intervals for proper tightness. Also,
visually inspect blade(s) for damage (e.g.,
excessive wear, bent, cracked).
Replace the blades with the original equipment
manufacturer’s blades only. “Use of parts which
do not meet the original equipment specifications
may lead to improper performance and
compromise safety!”
6. Mower blades are sharp. Wrap the blade or wear
gloves, and use extra caution when servicing
them.
7. Keep all nuts, bolts, and screws tight to be sure
the equipment is in safe working condition.
8. Never tamper with the safety interlock system or
other safety devices. Check their proper
operation regularly.
9. After striking a foreign object, stop the engine,
disconnect the spark plug wire(s) and ground
against the engine. Thoroughly inspect the
machine for any damage. Repair the damage
before starting and operating.
10. Never attempt to make adjustments or repairs to
the machine while the engine is running.
11. Grass catcher components and the discharge
cover are subject to wear and damage which
could expose moving parts or allow objects to be
thrown. For safety protection, frequently check
components and replace immediately with
original equipment manufacturer’s (O.E.M.) parts
only, listed in this manual. “Use of parts which do
not meet the original equipment specifications
may lead to improper performance and
compromise safety!”
12. Do not change the engine governor settings or
over-speed the engine. The governor controls the
maximum safe operating speed of the engine.
13. Maintain or replace safety and instruction labels,
as necessary.
14. Observe proper disposal laws and regulations for
gas, oil, etc. to protect the environment.
WARNING - YOUR RESPONSIBILITY: Restrict the use of this power machine to persons who
read, understand and follow the warnings and instructions in this manual and on the machine.
To Next Page
Loading...
Need help?
General
