Cub Cadet GTX 1054 User Manual

PTO / Blade Engage Knob

cutting deck or other (separately available)


Blade Engage knob inward to disengage
the power to the cutting deck or other
(separately available) attachments.
NOTE: 

starting the engine.
Parking Brake/Cruise Control Lever

steering wheel, the Parking Brake/Cruise Control lever is used
to engage the parking brake and the cruise control. Refer to

regarding the parking brake.
NOTE: The parking brake must be set if the operator leaves the
seat with the engine running or the engine will automatically
shut off.
NOTE: 
fastest ground speed. If the operator should attempt to do so,
the tractor will automatically decelerate to the fastest optimal
mowing ground speed.
WARNING! Never leave a running machine

brake, stop engine and remove key to prevent
unintended starting.
Fuel Level Indicator
The Fuel Level Indicator is located on the left side of the

tank.
14 se c t i O n 4 — cO n t r O l s a n d fe a t u r e s

Cub Cadet GTX 1054 Specifications

General

Engine Displacement	725 cc
Cutting Width	54 inches
Transmission	Hydrostatic
Deck Material	12-gauge steel
Deck Engagement	Electric PTO
Engine Size	725 cc
Horsepower	24 HP
Deck Size	54 inches
Blades	3
Turning Radius	16 inches
Engine Power	24 HP
Warranty	3-year limited
Front Tires	16 x 6.5 x 8