Cub Cadet S621 SS User Manual

8
Figure 4
• The rope guide, connected to the support rod, is
located on the right side of the lower handle. See
Figure 5.
Figure 5
• With the spark plug wire disconnected and
grounded, and with the safety key in the locked
position, pull the starter rope out of the engine. Slip
the starter rope into the rope guide. Tighten the
wing nut to secure.
Attaching Grass Bag
Figure 6
• Remove wing nuts holding the mulching baffle or
side discharge chute in place and remove from unit.
• Replace with grass bag adapter, while making sure
the inner lip of attachment goes under the edge of
the deck. Secure with the wing nuts previously
removed. See Figure 6.
• Lift chute door on the grass bag adapter and slide
grass bag onto the adapter. See Figure 7.
NOTE: The chute door has been designed to move the
starter rope out of the way of the bag when the chute
door is opened.
Figure 7
Attaching Side-Discharge Chute
• Remove mulching baffle or grass bag adapter from
the unit by disconnecting the wing nuts.
• Attach side discharge chute to the unit and secure
with wing nuts. See Figure 8.
Figure 8
Cable Tie
Lower
Handle
Starter
Rope
Rope
Guide
Lower
Handle
Support
Rod
Grass Bag
Adapter
Wing
Nuts
Grass
Bag
Chute
Door
Side Discharge
Chute

Cub Cadet S621 SS Specifications

General

Brand	Cub Cadet
Model	S621 SS
Category	Lawn Mower
Language	English