Cub Cadet YANMAR EX2900 User Manual

Ex2900 / Ex3200 ATTACHMENTS
CL300 Loader
Curved boom is constructed from 2” x 5” A500 structural steel, one-piece beam.
A 4” x 2” A500 structural steel torque beam attaches the curved boom beams
together. Features a heavy-duty 5 cu. ft. bucket with reinforced wear plates.
Curved boom design allows for bucket visibility and clear sight lines.
QuickAttach™ system also included.
CB75 Backhoe
QuickAttach™ system allows you to install or remove the backhoe in minutes as it
sets in the cradle with two locking pins. Single Power Beyond kit powers the
backhoe for reliability, control and smooth operation. Dual swing cylinders allow
for precise control of backhoe along foundations and provide more power for
backfilling. Curved boom assembly gives the operator better sight lines when
digging.
MM60RS Mid-Mount Mower
Mid-mount 60” deck with superior vacuum for a cleaner cut. Features an 11-
gauge stamped reinforced deck edge and cast-aluminum gearbox housing with
long-lasting Timken® tapered bearings. Cast-aluminum spindle housings with
7/8” shaft allows for cooler operation. Pulleys are machined from one piece of
steel for balance, reducing vibration and wear to the shaft. Marbane high-lift
blades harden to a Rockwell 50 rating. This extends the life of the blade while
giving a clean cut. QuickAttach™ system allows the deck to be installed and
removed quickly by using J-pins. SmartJet™ deck wash system allows a garden
hose to be attached to the deck cleaning.
FM60/FM72 Rear Finishing Mower
Features an 10-gauge deck housing and reinforcement plate under the spindle
assembly. Rear discharge disperses cuttings cleanly and evenly. Comes with a
wide range of cutting heights from 1” to 4” for clean cuts on all lawns. Gearbox is
highly engineered and rugged with straight-cut gears, casted cooling fins and
completely enclosed seals. The 4 durable composite rubber caster wheels give a
perfectly level cut while eliminating the worry of flat tires. Category 1, full floating
deck allows the mower to follow the contours of the land.

Cub Cadet YANMAR EX2900 Specifications

General

Brand	Cub Cadet
Model	YANMAR EX2900
Category	Tractor
Language	English

Summary

Ex2900 / Ex3200 Attachments

CL300 Loader

Curved boom loader with 5 cu. ft. bucket and QuickAttach™ system for visibility.

CB75 Backhoe

QuickAttach™ backhoe with dual swing cylinders for precise control and backfilling power.

MM60RS Mid-Mount Mower

60" mid-mount mower with superior vacuum, QuickAttach™, and SmartJet™ wash system.

FM60/FM72 Rear Finishing Mower

10-gauge rear mower with adjustable cutting heights, durable caster wheels, and float deck.

RB72 72" Rear Blade

72" rear blade with reinforced A-frame, 5 forward/5 reverse positions, and 3-position tilt.

LR60/LR72 Landscape Rake

Landscape rake with durable A-frame, 5 forward/5 reverse positions, and hardened tines.

RT66 66" Tiller

66" tiller with manual shift, adjustable skid shoes, and high-carbon rotor shaft.

PHD200 Post Hole Digger

Heavy-duty post hole digger with reinforced boom, cast-iron gearbox, and hardened knives.

BS60 Box Scraper

Heavy-duty box scraper with rigid frame, 5/8" hardened shanks, and reversible blades.

FB72 72" Dozerblade

72" dozerblade with heavy-duty moldboard, hydraulic power angle, and QuickAttach™.

RC60 60" Rotary Cutter

60" rotary cutter with reinforced deck, adjustable height, and floating top link.

HC300 Hard Cab Assembly

Steel hard cab assembly with fabric headliner, steel doors, and improved operator comfort.