Page%11%of%25%
%
5. Raise the Centre Upright Spigot Pole and tension the rope.
6. Attach the next Velcro Spreader to the Velcro Patch located above the main tent door on the right
hand side then insert Upright Spigot Pole into coinciding eyelet, doing up with wingnut and attaching
the rope. Peg down accordingly.
Attach Velcro Spreader to Velcro Patch above the door Prepare coinciding Upright Spigot Pole
7. Returning to the Centre Poles you can now grab one of the hanging Cup Spreaders and extend it
out to meet the Corner Velcro Spreader. Raise corner pole and tension corner ropes.
Bring Cup Spreader that is hanging from centre poles over to meet the corner Velcro Spreader
8. Repeat Step 7.above the kitchen.
Bring Cup Spreader that is hanging from centre poles over to meet the Velcro Spreader above the kitchen
To Next Page
Loading...