Shifters maintenance
If lubricant dries up you might experience the paddle shifter not coming back
to its original position freely.
Once a year it’s highly recom-
mended to put a really small drop
of lubricant (sewing machine oil or
similar) on the points as the
drawing on the right indicates,
just where the lever body touches
the base of the shifter when
pressed down.
A small drop of lubricant on the
contact point of the stainless steel
pin as indicated by the arrow will
help as well.
Do not use any spray products
such as WD40 or similar.
Shifter unit bottom view
11
To Next Page
Loading...