Cube LITENING C:68 X User Manual

| 5
C:68 X/ C:62 / GTC / HPCC:68 X/ C:62 / GTC / HPC
are only of optical kind and do not have any
eect on quality and performance of the
frame. Dierences in the nish and disgu-
rement are not a reason for any warranty
claim.
Our carbon frames and integral (full) car-
bon forks are approved
for a maximum system weight of 115 kg
Our MTB Hybrid models with carbon
frames are for a maximum weight 125 kg.
ROAD Hybrid models with carbon frames
and integral (full) carbon forks are ap-
proved for a maximum system weight of
115 kg.
A detailed informmation of all models can be found on our
homepage in the Service FAQ
Maximum total weight
=
Bicycle including entire additional load
and attach parts
+
Body weight incl. clothing and baggage
(e.g. backpag)
Loadings deviating from the purpose of
use intended (e.g. jumps) may lead to
damage and constitute a risk to the user.
We accept no liability for damage arising
from improper use.
•
It is not permissible to t additional com-
ponents to any frame or fork tubing which
is attached by means of clamping to the
tubing in question.
•
Undened stresses in the circumferential
direction of the tubing considerable can
occur in this way which may cause damage
and which may drastically reduce the ser-
vice life, and may also lead to a risk to the
safety of the user.
•
Basically every frame including forks must
be given a thorough examination at regular
intervals in respect of damage (e.g. cracks,
visible delamination, discolouration etc.).
•
After any accident, crash or other dened or
uncontrolled mechanical stresses the frame
and forks must not be ridden for reasons of
safety and should be sent to us for examina-
tion (see also Guarantee).
3.1 Use in competition
Danger of material damage!
Our frames are designed for extreme ri-
ding stresses. However during use in com-
petition stresses greater than those oc-
curring during normal riding may arise as
a result of collision with objects or other
riders. These stresses cannot possibly be
foreseen and allowed for in the construc-
tion and design of a frame or forks. We
therefore accept no liability for any dama-
ge resulting from use outside the inten-
ded purpose.
Shock and impact stresses may cause dama-
ge not visible externally such as delaminati-
on (separation of bres from the surround-
ing plastic matrix) in the bottom laminate
layers causing a drastic reduction in perfor-
mance and consequently safety as well.
•
With regard to accessories used the instruc-
tions or use and user guide provided by the
manufacturer concerned must be followed!
3 Manufacturing process
Twin Mold Technology
The Twin Mould technique uses re-usable
cores during the lay-up process to ensure
precision frame moulding. Special inserts
guarantee optimum ply orientation du-
ring the production process to add extra
strength at frame points subject to high-
er loads. This improves the safety of the
product and delivers outstanding stiness
characteristics.
Advanced Twin Mold
This technique uses a complete core to
provide the perfect frame form during the
lay-up process. As with the Twin Mould
technology, precise inserts are used to
ensure extra strength at high-stress frame
points. This combination oers maximum
control over bre orientations during
the lay-up and production process. The
Advanced Twin Mould high-tech carbon
manufacturing process translates to out-
standing product safety and quality to-
gether with optimum weight and stiness
characteristics.

Cube LITENING C:68 X Specifications

General

Brand	Cube
Model	LITENING C:68 X
Category	Bicycle Accessories
Language	English