Cube STEREO 120 HPC User Manual

4 |
C:68 X/ C:62 / GTC / HPC
2 General Notes
Risk of Personal Injury and Material
Damage!
Failure to observe the instructions con-
tained in this Owner‘s Manual may re-
sult in dangerous riding situations, falls,
accidents and material damage.
Read through these instructions care-
fully before using your bicycle for the
rst time.
•
Read through these instructions carefully
before using your bicycle for the rst time.
•
Keep this Owner‘s Manual and pass it on
with the bicycle if you ever sell it or give it
as a present.
•
It is your responsibility to check your bicycle
and to have any necessary work done to it.
•
If you do not understand many of the sec-
tions of this Owner‘s Manual consult your
cycle dealer.
Carbon frames and (full) carbon forks are
lightweight construction components
which are manufactured in several pro-
duction steps using modern manufac-
turing procedures. The light weight is
achieved mainly by using high-perfor-
mance bre composite materials in con-
junction with an appropriate method of
bre construction. Component safety
and rigidity, in addition to low mass we-
re important criteria in the design of the
carbon frames and forks. Unavoidable
irregularities in the bre orientation
arising during manual procedures and
small air inclusions in the resin coating
layer or surface unevennesses are pure-
ly visual in nature and have no inuence
on the quality and performance of the
frame. Dierences in nish and “ble-
mishes” do not constitute grounds for
complaint.
Risk of Personal Injury and Material
Damage!
Irregularities of textile, like near-surface
minor air entrapments in the coating re-
sin or unevenness of the surface, which
cannot be avoided due to the process of
manufacture and handcraft,
Dear Customer
We would like to thank you for your choice of a
bike from our Company and thank you for your
trust. With this purchase you have a high-quality,
environmentally friendly means of travel which
will give you a lot of pleasure and at the same
time promote your health.
Your cycle dealer is also very important to you
for advice and nal assembly. He is your point of
contact for servicing, inspections, modications
and all types of repairs. Should you have any
questions regarding our product please contact
your cycle dealer.
1 About this Owner‘s
Manual
1.1 Conventions
1.1.1 Symbol
Note!
Draws your attention to items requiring
your particular attention.
Warning!
Points out to you the possibility of slight
personal injury and possible material da-
mage.
Danger!
Points out to you the possibility of grave
personal injury even leading to death.
Torque
Also called tightening torque. Indicates
how “tight” a screw has been tighte-
ned.
Specialist
dealer /
specialist
workshop
In Germany: In this Owner’s Manual
the term “specialist dealer” and/or
“specialist workshop” indicates a dealer
trained as a bicycle mechanic and/or
cycle mechanic authorised by the com-
petent Chamber of Trade to operate a
specialist workshop.
Similarly the latter must be authorised
by the manufacturer of this cycle to
check and conrm correct assembly
and roadworthiness of this cycle.
Handforce
The force an average adult human can
exert with his hand using low to medi-
um eort.
Nm Newton meter; unit for torque

Cube STEREO 120 HPC Specifications

General

Brand	Cube
Model	STEREO 120 HPC
Category	Bicycle Accessories
Language	English