Cuckoo CBT-H1031W/WHULUS

Need help?

Do you have a question about the Cuckoo CBT-H1031W/WHULUS and is the answer not in the manual?

Overview

Function Description
Important Technical Specifications
Usage Features
Maintenance Features

This document describes the Cuckoo Electronic Toilet Seat, model CBT-H1031W/WHULUS, a bidet product designed for enhanced hygiene and comfort.

Function Description:

The Cuckoo Electronic Toilet Seat provides continuous warm water for washing, ensuring a comfortable experience. It features a "Rear" function for general posterior washing and a "Front" function specifically for women (bidet). A "Soft Rear" function offers a gentle, massaging water current for regular motions, which can help induce regular bowel movements. The device also includes an "Air Dry" function with adjustable temperature levels (1-5) to dry off water drops after washing.

For user comfort, the toilet seat offers adjustable water pressure (1-5 levels) and adjustable seat temperature (1-5 levels). The "Massage" function operates automatically with high and low water pressure (levels 1-5) while the rear mode is active, specifically from level 3-5 for the soft rear function. Nozzle position can be adjusted to suit different body types, with an extended length of nozzles for a broader range of options.

The product incorporates a "Child" function, which allows for Rear, Front, and Air Dry functions without needing to sit on the toilet seat. In Child mode, the nozzle extends to its end, operates for 40 seconds, and allows water and seat temperature settings from level 1-4, water pressure from level 1-3 (starting at level 3), and dry temperature from level 1-4. The Massage function is also available in Child mode while Rear mode is active. Child mode operates for 3 minutes before automatically returning to the previous mode.

Important Technical Specifications:

Model Name: CBT-H1031W/WHULUS
Rating: AC120V, 60HZ
Maximum Power Consumption: 864W
Power Cord Length: 1.2m
Water Supply Method: Directly Coupled with Waterworks
Used Water Supply Pressure: 0.1~0.74MPa (1~7.4bar)
Water Dispense Volume:
- 'Rear' function: MAX 0.7 L/min
- 'Front' function: MAX 0.8 L/min
- 'Soft Rear' function: MAX 0.75L/min
Cleaning Apparatus Water Pressure Control: 5 Levels
Cleaning Apparatus Temp. Control: Room Temperature, 93.2°F(34°C), 96.8°F(36°C), 100.4°F(38°C), 104°F(40°C)
Cleaning Apparatus Heater Capacity: 800W
Cleaning Apparatus Safety Device: Thermo Switch, Temp. Fuse, Water Level Sensor
Heated Toilet Seat Temp. Control: Room Temperature, 93.2°F(34°C), 96.8°F(36°C), 100.4°F(38°C), 104°F(40°C)
Heated Toilet Seat Heater Capacity: 55W
Heated Toilet Seat Safety Device: Temp. Fuse
Hot Air Dry Apparatus Temp. Control: Room Temperature of up to 113°F(45°C), (5 Levels)
Hot Air Dry Apparatus Heater Capacity: 150W
Hot Air Dry Apparatus Safety Device: Temp. Fuse, Bimetal Switch
Used Water Supply Temperature: 37.4~95°F(3~35°C)
Used Surrounding Temperature: 37.4~104°F(3~40°C)
Product Dimension: 462mm x 496mm x 138mm
Product Weight: 3.7kg
Nozzles: Made from stainless steel for hygiene.

Usage Features:

The toilet seat is designed for easy installation and cleaning due to its one-touch detachable structure. It includes a "Clean" button for kids, making it safe for children to use. The device incorporates multiple safety features such as Low Temp. Keep Warm mode, an Earth Leakage Breaker, Temp. Sensor, and Water Level Sensor. Power saving modes are available: "Basic Power Saving" and "Advanced Power Saving." In Basic Power Saving, the green lamp turns on, and Water and Seat Temp. remain as adjusted for 30 minutes, after which water temperature turns OFF, and seat temperature remains at 30 degrees for 24 hours before turning OFF. When a user sits on the seat, Basic Power Saving temporarily turns off and reactivates upon standing. Advanced Power Saving is activated by pressing the button twice (red lamp turns on), and both Water and Seat temperature are OFF. Similar to Basic Power Saving, it temporarily turns off when seated and reactivates upon standing. A "Preventing low temperature burns" function automatically lowers the seat temperature from level 5 to prevent burns if a user sits for a long time. It returns to the set value when the user resets or stands up. The product requires a grounded 120V AC, 60Hz power outlet with at least a 15A rating. It is crucial to connect the water supply valve to the cold water pipe to prevent burns or malfunction. The toilet seat sensor activates when touched by human skin; if covered, it will not sense the user.

Maintenance Features:

The toilet seat features a "Nozzle Clean" function, available in both auto and manual modes, to maintain hygiene.

Auto Nozzle Cleaning: Briefly pressing the "Nozzle Cleaning" button while not seated initiates auto mode, draining water through the drain hose with a beep sound and moving the nozzle.
Manual Nozzle Cleaning: Pressing the "Nozzle Cleaning" button for 3 seconds while not seated activates manual mode, extending the nozzle with a beep sound. Users can then clean the nozzle with an unused toothbrush. Pressing the "Stop" button retracts the nozzle and initiates self-cleaning. If seated, the nozzle will retract, and it will automatically retract after 2 minutes if no action is taken. For exterior cleaning, a soft cloth dampened with water should be used. Harsh chemicals like thinner, benzene, chlorine bleach, or rough sponges/brushes should be avoided as they can cause discoloration, cracks, or damage. Water should not be sprayed directly onto the nozzle or dry air vent to prevent electric shock or malfunction. Before cleaning the waterworks filter, the Water Supply Valve must be closed, and the Water Supply Hose for the Electronic Toilet Seat disassembled. After cleaning, reassemble firmly to prevent leaks. For disassembly (e.g., for moving or deep cleaning), first pull out the power plug, close the water supply valve, loosen the nut on the T-Valve side of the hose, and then disassemble the main frame from the toilet by pressing the lever and pulling the product forward. A coin can be used to loosen the drain plug on the bottom of the toilet seat body to completely drain water from the hot water tank. Finally, disassemble the water supply hose, T-Valve, and catch plate. For winter use, it is recommended not to turn off the hot water temperature completely but to set it above "Level 2" to prevent freezing. If not used for a long time, the hot water tank should be drained. In regions prone to freezing, heating should be provided to prevent the surrounding temperature from dropping below 32°F (0°C) to avoid damage to pipes and water leakage.