EasyManua.ls Logo

Cuckoo SRP-0611FA - How to Clean; Cleaning External and Internal Parts; Cleaning Water Collector and Pressure Weight Valve

Cuckoo SRP-0611FA
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CCAAUUTTIIOONN FFOORR SSAAFFEETTYY
ENGLISH
33
HHOOWW TTOO CCLLEEAANN
When cleaning the cooker always pull the power plug with dry hands and clean it
after the cooker is fully cooled off.
Cleaning the main body
Cleaning the inner pot and inside the top cover
Cleaning inside the top cover Cleaning inside the main body
Cleaning the water collector
Cleaning the valve hole in the pressure weight
Water
Collector
Temperature sensor
on the surface
Turn the pressure
weight counter-
clockwise to take it
out.
Cleaning
Pin
Alien
Substance
When cleaning the top cover of the main body,
do not use benzene, thinner, detergent etc,
It can cause discoloration or transformation.
Wipe it with a clean cloth.
Do not wash the main body.
When cleaning the inner pot, do not use
tough scrubber, metallic scrubber, brush,
abrasive material etc.
The coating can come off.
Clean it with kitchen cleaner and sponge.
Soak the cloth in hot water and squeeze out
the water. Use this cloth to clean inside the
top cover of any
alien substance.
After taking the inner pot out, clean the
bottom surface(especially the surface
temperature sensor) of before using.
Incorrect temperature reading from the
sensor can lead to or malfunction or even
cause fire.
Since the water can be collected at the
water collector, clean it with a cloth
before using.

Related product manuals