Cuddeback Attack IR - Checking Attacks Detection Zone; Arming the Attack Camera

7
 4) AttackfeaturesourGenius
  MountingSystem.Thissystem
allows you to attach the bracket
to a tree and then slide Attack on
and off the bracket as needed.
 5) Oncethetreebracketisattached
to the tree, make sure both thumb
screws on the back of Attack are
  tightenedcompletely.Thenslide
Attack onto the bracket.
 6) Itisbesttoremoveanyvegetationandobstructions
  fromAttack’seld-of-viewthatmayinterferewith
  Attack’ssensororcamera.
 7) Aim/alignAttacktomakesureitispointedwhere
you expect the animals to be. Aim Attack level
  withthegroundtomaximizedetectionrange
  andperformance.YoucanuseAttack’stestfeature
  (explainednext)tohelpyoudeterminethe
detection area.
 8) Cuddebackhasoptionalmountingmethods
  available,suchastilt-brackets,bear-resistant
boxes, and mounting posts. See your retailer
or www.cuddeback.com for details.