Cuddeback Attack series - Parameter Settings and Customization

13
Step 1: Press the A key to display P1 (strobe flash power)
P1controlstheAttackashpower.(This setting is ignored
on the Attack IR/Black Flash and will be displayed as P1:--)
TheavailablesettingsareselectedbypressingtheBkey:
P1:1 =
10footashrange(bestsettingforindooruse)
P1:2=20footashrange
P1:3 =
30footashrange(bestsettingforgeneraluse)
P1:4=40+footashrange(bestsettingforelds)
Step 2: Press the A key to display P2 (video length)
P2controlstheAttackvideolength.
TheavailablesettingsareselectedbypressingtheBkey:
P2:1=10secondvideo
P2:2=20secondvideo
P2:3=30secondvideo
Step 3:
Press the A key to display P3 (video operating time)
P3controlstheAttackIR/BlackFlashvideooperatingtime
(This setting is ignored on the Attack and will be displayed as P3:--)
TheavailablesettingsareselectedbypressingtheBkey:
P3:1 = record videos only at night
P3:2 = record videos only during the day
P3:3 = record videos during day & night
Step 4: Press the A key to display P4 (operating time)
P4controlsthetimeAttackwilltakepictures.
TheavailablesettingsareselectedbypressingtheBkey:
P4:1 = operate only at night
P4:2 = operate only during the day
P4:3 = operate during day & night