Cuddeback Silver Series

To Next Page

Silver & Blue Series Troubleshooter

Page 1 of 5

Cuddeback Troubleshooting Steps for Silver & Blue Series

Use the following steps to determine if your Cuddeback Silver & Blue Series camera is working

correctly. Before requesting service, follow these simple troubleshooting steps.

 Many common problems can be resolved with new batteries. We recommend

using new batteries for these tests. Quality alkaline batteries like Rayovac, Duracell

and Energizer should always be used in the Cuddeback cameras.

 Defective SD cards can also cause problems. These tests will verify your SD card is

functioning correctly.

Test 1. Camera Power

This test will verify that your camera can turn ON.

1. Remove the SD card (if installed)

2. Remove batteries from camera. Wait 15 seconds.

3. Insert batteries, observing correct battery polarity. IMPORTANT: IN EXCEPTIONAL

CIRCUMSTANCES, BATTERIES MAY LEAK FLUIDS THAT CAN CAUSE A CHEMICAL

Need help?

Do you have a question about the Cuddeback Silver Series and is the answer not in the manual?

Summary

Cuddeback Camera Troubleshooting Guide

Camera Power Test

Verifies camera power function by checking battery installation and LCD display.

Push Buttons and LCD Test

Checks camera's basic component functionality, including buttons and LCD display.

Integrated Camera Test

Utilizes built-in test features to verify battery, filter, and flash operations.

Motion and Heat Sensor Test

Verifies the camera's motion/heat sensor by checking red LED illumination.

False Activity Sensor Test

Ensures the motion/heat sensor does not falsely detect motion by covering it.