Cuddeback Cuddelink Series - Core Concepts and Setup; Key Terms

7
TERMS
CuddeLink is Cuddeback’s trademark name for
Cuddeback’s network enabled trail cameras.
CL is an abbreviaon for CuddeLink.
Network refers to a collecon of CuddeLink cameras that
are in radio contact with each other.
Home refers to the camera or device that collects all
images.
Remote refers to cameras that transmit images to the
HOME.
Repeater refers to a device that acts as a relay staon on
a CuddeLink network. The REPEATER does not take
pictures, it only transmits images from one node to the
next node.
Node is a general name for any home, remote and
repeater on the network.
Chain is 2 or more cameras that are linked together via
the CuddeLink network.
Link is 1 connecon from 1 camera to the next camera.
High Resoluon Image is the full size image recorded by
the camera. These images are always saved on the
camera’s SD card.
Thumbnail Image is a compressed image that is much
smaller than the original image taken by the camera.
These are the images transferred to Home. The full
resoluon image is available on the Remote camera so
you do have access to it if needed.