Cudy RE750 User Manual

Quick Installation Guide
Hardware Overview
1. Launch a web browser and type http://192.168.10.254/ (or
http://ap.setup/) in the address field. Enter admin for password to
login.
2. Below picture will pop up automatically if it is your first time to
configure , or you should click Wizard to make it show up.
Configure
1. Switch the mode selector to Repeater position.
2. Plug the Device into an electrical outlet near your Wi-Fi router.
3. Shift the power switch to ON and wait until Wi-Fi LED is flashing.
Wired
Turn off the Wi-Fi on your computer and connect it to the LAN port of
Cudy Repeater via an Ethernet cable.
Wireless
1.Disconnect the Ethernet (Wired) connection if using a laptop or PC.
2.Connect your device to extender’s Wi-Fi
Cudy-RE750 or
Cudy-RE750-5G.
Power ON
Connect to the Device
Not connected
Connections are available
Wireless Network Connection
Cudy-RE750
Cudy-RE750-5G
Connect
Connect automatically
Method Two: Using Web browser
2
Login
admin
English
Wi-FI Range Extender
Repeater Wizard
Connect
Select a Wi-Fi Manually enter
Cudy-XXXX
Cudy-XXXX-5G
Cudy-Guest
Connect to:
Wi-Fi Password:
Extended 5G:
Extended 2.4G:
Repeater Mode: Bridge
Repeater Mode
1. Switch the mode selector to Repeater position.
2. Plug RE750 into an electrical outlet near your Wi-Fi router. Power on
and wait until the WLAN LED is flashing.
3. Press and hold RE750's WPS button for 1~2 seconds before release,
then press WPS button of your router.
4. Waiting for them to connect, it may take 2 minutes.
1
Method One: Using WPS button
5. When successful, all of the 3 Wi-Fi LEDs of RE750 should turn on and
stay solid. And it will create 2 network names which contains the words
of your router's Wi-Fi name and "EXT2G" or "EXT5G" , the password is
the same as your router‘s Wi-Fi.
6. Then plug it to a suitable location(ensure at least 2 Wi-Fi LEDs solid
on), no need to configure again.
WPS
Press 1~2 seconds
WPS
Press 1~2 seconds
Video Installation Guide
https://youtu.be/S9bfh9g6Q9Y
support@cudytech.com
Default Parameters
Web Setup: http://ap.setup/
Default IP: http://192.168.10.254/
Password: admin
SSID1:Cudy-RE750
SSID2:Cudy-RE750-5G
Technical Support
support@cudytech.com
Power On/Off
Mode Selector
WPS Button
Wi-Fi LED
WAN/LAN LED
LAN LED
Power/WPS LED
LAN Port
WAN/LAN Port
Reset Button
1
2
3
4
5
6
7
8
9
10

Cudy RE750 Specifications

General

Brand	Cudy
Model	RE750
Category	Extender
Language	English

Summary

Hardware Overview and Device Configuration

Device Components and Defaults

Details on device buttons, ports, LEDs, default network names, IP, and admin password.

Repeater Mode Setup Methods

Guides for setting up repeater mode using WPS button and web browser.

Initial Configuration Steps

Instructions for accessing the device via web browser and using the setup wizard.

Advanced Setup and Troubleshooting

Repeater Mode Finalization and Relocation

Completing repeater setup, verifying LEDs, and finding optimal placement.

Alternative Operation Modes

Information on configuring the device for Router Mode (PPPoE, Static IP, Dynamic IP) and AP Mode.

Security and Maintenance

Guidance on changing the default login password and upgrading device firmware.

Frequently Asked Questions

Answers to common issues regarding login, Wi-Fi signal, resets, and placement.