Need help?Do you have a question about the CUGGL 706/2326 and is the answer not in the manual?
Essential safety advice for using the bedrail, including age limits and cot comparison.
Instructions to check all bedrail components are present and correct before assembly.
Instructions for unfolding the bedrail and securing the plastic locking mechanism.
Guide on connecting the bottom tubes and threading them through the bedrail fabric.
Procedure for inserting the left tube into the plastic connector and attaching the hinge.
Instructions to fix the right hinge system and connect the right tube through the fabric.
Final step to slide and secure the plastic parts behind the buttons for assembly completion.
How to adjust strap length and place the steel plate stopper against the mattress and bed.
Instructions for pulling back and tightening the strap ends to lock the steel plate securely.
WARNING: Ensure minimum 250mm gap at bed ends and bedrail height below 600mm from floor.
Procedure to detach left/right tubes by pressing buttons on the hinge and bottom tube.
Instructions for removing the bottom tube from the fabric.
Guide to sliding plastics and folding the bedrail for compact storage.
Periodically inspect the bedrail for damage, wear, loose parts, and secure mountings.
Use warm water and mild detergent for sponging; avoid abrasives, ammonia, or bleach.
Steps to remove and clean the fabric from the metal frame.
General| Brand | CUGGL |
|---|---|
| Model | 706/2326 |
| Category | Indoor Furnishing |
| Language | English |
To Next Page
