6
ASSEMBLY
BLENDING ATTACHMENT
1. Align the motor body housing with
the blending shaft and push the
pieces together until you hear and
feel them click together. It may be
helpful to press the release button
when assembling.
2. Plug the power cord of the hand
blender into an electrical outlet.
CHOPPER/GRINDER ATTACHMENT
1. Connect the motor body
housing to the top of the
work bowl cover.
2. Align the spine in the
chopper/grinder cover’s
drive shaft with the ribbed
opening on the underside of
the motor body housing.
3. When aligned properly, slide
the two pieces together
until you feel
and hear a slight click.
4. Place the chopping/grinding blade
into center of the work bowl over
metal blade shaft.
5. Place the motor body housing with
cover on top of the work bowl and
rotate clockwise to lock
into place.
6. Plug the power cord of the hand
blender into an electrical outlet.
To Next Page
Loading...
