Cuisinart SNOW CONE MAKER - User Manual

Snow Cone Maker
QUICK REFERENCE GUIDE
PG-35542-ESP
BEFORE THE FIRST USE
Carefully unpack your Cuisinart
®
Snow Cone Maker. Remove plastic bags from all parts of
the unit. Rinse the snow bin with water and a non-abrasive cleanser, and then dry thoroughly.
OPERATING INSTRUCTIONS
1.
3.
2.
4.
Place unit on a at, sturdy
surface where it will not be
knocked over. Check ice chute
for presence of foreign objects before
plugging in. WARNING: DO NOT TOUCH
BLADE.
To begin shaving ice, drop approx. 8–12
ice cubes (depending on size and shape)
into the ice chute. Do not overll or the
interlock safety feature will prevent the
shaving mechanism from turning on.
Insert the removable snow
bin onto the main housing. Be
sure that the toggle switch is
set to the OFF position and plug into
an outlet.
Flip the toggle switch to the
ON position and rmly push
the ice press
down to start the ice-
shaving mechanism.
¡IMPORTANTE!
No empuje los cubitos de hielo con la mano ni ningún utensilio;
solamente utilice la palanca.
Estos útiles consejos complementan el manual de instrucciones. Para lograr un rendimiento
óptimo y una operación segura, lea el manual de instrucciones.
PARA MÁS CONSEJOS ÚTILES, VÉASE EL MANUAL
DE INSTRUCCIONES.
LIMPIEZA Y MANTENIMIENTO
Desconecte el aparato antes de limpiarlo o guardarlo.
1. NUNCA SUMERJA LA UNIDAD EN AGUA U OTRO LÍQUIDO, NI LA PONGA EN EL
LAVAVAJILLAS.
2. ADVERTENCIA: LA CUCHILLA ES MUY FILOSA. NO la toque y nunca introduzca la
mano en la boca de llenado para limpiarla. Para limpiar el mecanismo de raspado, vierta
agua tibia en la boca de llenado; esto derretirá cualquier residuo de hielo resultante del
raspado.
3. Lave el recipiente recolector, los conos de plástico y la cuchara para hielo en agua
jabonosa tibia, usando un detergente no abrasivo, o métalos en el lavavajillas (nivel
superior solamente). Seque bien.
4. Limpie la carcasa del aparato con un paño limpio ligeramente humedecido.
5. 6.
Después de terminar, apague
(“OFF”) y desconecte el
aparato. Retire el recipiente
recolector de la base y use
la cuchara para hielo para
colocar el hielo raspado en
los conos.
Rocíe los raspados con jarabe
(véase las sugestiones en la
sección “RECETAS” del manual
de instrucciones o utilice los
saborizantes de su elección).

Summary

Before the First Use

Initial Unpacking and Cleaning

Unpack the Cuisinart Snow Cone Maker, remove plastic bags, rinse the snow bin with water and cleanser, then dry.

Operating Instructions

Setup and Safety Check

Place unit on a flat surface, check ice chute for foreign objects before plugging in. Do not touch the blade.

Insert Snow Bin and Power On

Insert the snow bin onto the main housing with the switch OFF, then plug into an outlet.

Add Ice Cubes

Drop 8-12 ice cubes into the ice chute. Do not overfill to avoid preventing the shaving mechanism.

Start Shaving Ice

Flip the toggle switch to ON and push the ice press down firmly to start shaving.

Shape Snow Cones

After shaving, turn the switch OFF, unplug. Remove snow bin and use the ice scooper to shape snow cones.

Add Flavorings

Add ingredients specified in the recipe section or as desired.

Cleaning and Care

General Cleaning Precautions

Never immerse the unit in water or place it in the dishwasher. Blade is sharp; avoid contact.

Cleaning the Shaving Mechanism

Pour warm water down the ice chute to melt and clear any residue.

Washing Removable Parts

Wash snow bin, cones, and scooper in warm soapy water or top rack of dishwasher. Dry thoroughly.

Wiping the Housing

Wipe the main housing and ice press with a clean, damp cloth.

Important Usage Reminder

Do not push ice cubes with hands or instruments; use only the ice press.

Cuisinart SNOW CONE MAKER Specifications

General

Model	SCM-10
Product Type	Snow Cone Maker
Brand	Cuisinart
Color	White
Material	Plastic
Power Source	Electric
Voltage	120V
Blades	Stainless Steel
Included Accessories	reusable plastic cones
Capacity	4-5 cups