Cuisipro 747190 - How to Clean; How to Insert Batteries; Tips; Warning

4 5
How to Clean
• Scraperandcupisdishwashersafe.Bladeunitis
hand-wash only. Electric base is wipe-clean only.
• Keepelectricbaseunitdry.DONOT
SUBMERGEINWATER.
How to insert batteries
1. Turn herb chopper upside down
2. Turn base cover counter clockwise to unlock.
Carefully pull base cover away from electric base.
3. Insert 6 AA batteries. Battery compartment symbol
indicates which side of the battery faces up.
4. Place base cover over electric base. Ensure that
the solid black circle on the base cover aligns
with the hollow circle on the electric base. Turn
base cover clockwise until it locks.
5. Turn herb chopper right side up. It is now ready
to use
Tips
• Donotinsertherbstemsintothecup.Stems
can clog the blade.
• Usescrapertocleanthesidesofthecup.The
scraper is contoured to perfectly hug the sides
of the cup.
• Whenusingdryingredients,turnchopper
up-side-down, pulse button, and gradually turn
right side up in a swinging motion.
• Turningandshakingtheherbchopperasyoupress
the pulse button will help create an even chop.
• Ensurecupistightlysealedwiththebladeunit.
Loose blade units may not properly engage
safety lock thus preventing the product from
turning on.
Warning
• HerbChopperwillonlyturnonwhencupisin
the locked position
• Donotturnchopperonformorethan4minutes
at a time. Overheating the motor will engage
thermal sensor and disable chopper. Chopper
will be operational when the motor cools down
(approximately 35 minutes).
• Avoidcontactwithmovingparts
• Bladesaresharp.Handlewithcare.
• Keepawayfromchildren’sreach.
• Keeptheelectricbaseunitdry.
Troubleshooting
IfyourHerbChopperwon’tturn-on,pleasecheck
the following:
• Batteriesareinsertedcorrectly
• Cupisproperlylockedandsafetylockisengaged
• Themotormayhaveoverheated.Letmotorcool
down, product will be operational again in 35
minutes.