Culer SOLO - Use & Operation: Power Off

www.culer.com | 1.800.320.6478 | support@culer.com
Rev. 1.16.17
5
NOTE: The CULER ash evaporative cooler will continue to atomize for a short
time while the unit depressurizes. Be sure to turn off product before unplugging.
POWER OFF
5. Press the FAN button to turn
on fan. Adjust air speed by
pressing button: (high, med,
low) Green light will illuminate.
6. Press the COOL button to
activate atomization. Green
light will illuminate.
7. Adjust the cooling port(s) to
the desired positions up-down
and side-to-side.
Press the POWER button to
turn off. Green light will
turn off.
Use & Operation