www.culer.com | 1.800.320.6478 | support@culer.com
Rev. 1.16.17
7
Care
CLEANING WATER TANK
1. Completely drain water tank.
(See Empyting Water Tank on
page 9).
3. Add 1 tablespoon (half a
capful) of vinegar to the water
tank.
4. Replace cap and turn until
sealed. Run until the unit is out
of the water and vinegar
solution.
5. The cooler is clean and ready
for continued operation or long-
term storage.
2. Remove tank cap and ll water
tank with half a gallon of any
drinkable water (tap, hose,
bottled, or distilled).
To Next Page
Loading...