Culinaire AT40ST - User Manual

Questions and Answers

T
torresjessicaAug 13, 2025
What to do if Culinaire AT40ST Dishwasher is not filling with water?
- T
  Timothy ChavezAug 13, 2025
  If your Culinaire Dishwasher isn't filling with water, it could be due to several reasons. First, check that the water supply is properly connected, fully open, and free from any blockages. Also, inspect the solenoid valve filter for obstructions or deposits. Ensure the water supply pressure is adequate. Finally, make sure the dishwasher door is completely closed and the overflow device is correctly positioned inside the tank.
J
John SimsAug 17, 2025
Why is my Culinaire Dishwasher not draining?
- K
  Kristin BerryAug 17, 2025
  If your Culinaire Dishwasher isn't draining, start by checking that the overflow device is completely removed and that there are no obstructions in the water drain line. Also, verify that the drain wires are properly connected to the electronic board.
J
Joseph SchneiderAug 21, 2025
How to fix Culinaire AT40ST Dishwasher if it takes too long to heat?
- B
  Brian MeltonAug 21, 2025
  If your Culinaire Dishwasher is taking too long to heat the tank (maximum tank heating time reached 30min), check that the heater element wires are correctly connected to the electronic board. Also, verify that the heater element is working correctly and that there is no limestone buildup on it.
R
Rebecca WilsonAug 25, 2025
What to do if Culinaire AT40ST booster is not heating?
- S
  Samuel HermanAug 26, 2025
  If your Culinaire Dishwasher is taking too long to heat the booster (maximum booster heating time reached 15min), verify that the heater element wires are correctly connected to the electronic board. Also, verify that the heater element is working correctly and that there is no limestone on it.
L
Laurie WeberAug 29, 2025
What to do if Culinaire AT40ST Dishwasher shows tank temperature limit error?
- A
  Ashley ThompsonAug 29, 2025
  If your Culinaire Dishwasher's tank temperature has reached its maximum set point (set point +7°C / 44°F), you will need to substitute the electronic board.
B
barnesfrancisSep 1, 2025
What to do if Culinaire AT40ST shows booster temperature limit error?
- N
  nicholas42Sep 1, 2025
  If your Culinaire Dishwasher's booster temperature has reached its maximum set point (set point +14°C / 57°F), you will need to substitute the electronic board.
B
Brooke WellsSep 5, 2025
How to fix Booster Temperature Probe Error on Culinaire AT40ST?
- M
  Mckenzie WhiteSep 5, 2025
  If you're getting a Booster Temperature Probe Error on your Culinaire Dishwasher, it could be due to the probe not being connected or being faulty. Make sure the probe is correctly and securely connected to the electronic board. Also, check that the probe is correctly positioned inside the booster and that there's no limestone on it.
H
harrisemilySep 9, 2025
How to fix Tank Temperature Probe Error on Culinaire Dishwasher?
- O
  Olivia NovakSep 9, 2025
  If you're getting a Tank Temperature Probe Error on your Culinaire Dishwasher, it might be due to the probe not being connected properly or being faulty. Verify that the probe is correctly and securely connected to the electronic board. Also, check that the probe is correctly positioned inside the tank and that there is no limestone on it.