fixed power outlet with a protective grounding. Do not use any type of adapter or converter (such as " three to
two" converter) to connect the power plug.
2)
Keep this device as far away from other electronic devices as possible.
3)
Make sure to use the power cord provided or specified by the company.
4)
Fol low the steps to connect the power cord.
General points to note
1)
Specif ies a power cord that can be connected to this product.
The application of the power cord provided by the company will not damage the EMC performance of the product. If
the power cord is not specified, the EMC performance of the equipment may be significantly reduced.
2)
Points to note when user modification is prohibited
Users are not allowed to modify this product, otherwise the EMC performance of this product may be reduced.
Product modifications include the following changes:
a)
Power Cord (length, material, wiring, etc.);
b)
Equipment Installation/layout;
c)
Equipment conf iguration/components ;
d)
Equipment Protection Parts (cover opening/closing and cover fixing parts).
3)
Al 1 covers should be closed when operating the equipment. If for some reason the cover i s not closed, be sure to
shut down the system before st ar ting/continuing operations.
4)
The operating system may affect the EMC performance of the system with the cover open.
Electric wheelchairs are expected to be used in the following specified electromagnetic environment, and the
purchaser and user of electric wheelchairs shall ensure that it is used in such electromagnetic environment.
To Next Page
Loading...