EasyManua.ls Logo

Culver Mobility ARTEMIS - Handlebar and Clutch Assembly; Use of Clutch; Switching to Manual Mode

Default Icon
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
16
5^ Insert the straddle into the frame mounting Chute (fig.)
6^ Hold the handlebars in both hands and raise them up until
the backrest is fully extended. Make sure that the spring pin
is inserted into the holes of the handlebars (as shown) to ensure safe use.
7 Use of clutch
When the electric whee 1 chair breaks down or the battery runs out, switch the wheelchair to manual mode and push
i t to a safe area :
©E1 ectr ic mode to manual mode : pull the clutch
handle out of the left and right wheels and rotate the hand 1
e so that the limit block is stuck on the flat track (as shown).

Related product manuals